Modern logistics: AutoStore, high-bay warehouses and automation

Modern logistics places very high demands on the flatness, stability and load-bearing capacity of the floor.
Here you can read about how jointless concrete floors work with AutoStore, high-bay warehouses, AGVs/AMRs and other automation.


Is Teqplan suitable for AutoStore facilities?

Yes. Teqplan is one of the best-suited floors for AutoStore. The system requires an extremely flat and solid base so that the aluminium grid can be installed securely and the robots can operate at full speed. Teqplan’s very high flatness, jointless surface and load-bearing capacity meet these requirements.
The AutoStore system is built on a metal grid where robots move at high speed on top of the bins. Even the smallest deviation in flatness causes errors that accumulate further up the structure and can lead to downtime, uneven loading of the robots and accelerated wear. We recommend involving us early in the design phase so that the Teqplan floor can be designed precisely to the AutoStore supplier’s specifications.

 

.

Why is floor quality crucial for automated warehouses?

Logistikbranschen rör sig snabbt mot helautomatiserade lösningar – AutoStore, The logistics industry is moving rapidly towards fully automated solutions, such as AutoStore, shuttle systems, AGVs, AMRs and VNA high-bay warehouses, all of which place extreme demands on the flatness and load-bearing capacity of the floor. Even small deviations can stop operations, wear out equipment prematurely and disrupt sensors.
Specifically, floor quality affects:
• Operational stability – joints and unevenness cause unplanned stoppages in automated systems.
• Robot service life – AGV/AMR wheels, bearings and chassis wear out faster due to impacts and vibrations.
• Sensor accuracy – LiDAR, cameras and positioning systems are disrupted by unevenness.
• Height errors in high-bay warehouses – deviations accumulate vertically and can make picking at heights of 12+ metres unsafe.
• Energy consumption – an uneven floor increases friction and rolling resistance, which drains battery life.
As the CEO of one of our customers put it: “A floor is not just a floor. The floor’s impact on day-to-day operations should not be underestimated.”

Can Teqplan be used for narrow aisle warehouses and VNA trucks?

Yes. Teqplan’s high flatness makes it ideal for very narrow aisle (VNA) warehouses, where trucks operate in very narrow aisles and pick at great heights. We adapt the floor’s flatness tolerances to the truck supplier’s specific requirements (typically an FM classification or equivalent).

 

How do jointless floors affect AGV and AMR traffic?

Automated guided vehicles (AGVs) and autonomous mobile robots (AMRs) are sensitive to joints, cracks and unevenness. A jointless Teqplan floor provides smooth, vibration-free travel, which extends the robots’ service life, improves sensor accuracy and allows higher travel speeds without putting loads or equipment at risk.

 

Can jointless concrete floors handle heavy racking loads in high-bay warehouses?

JYes. Teqbase + Teqplan is designed for point loads of up to 100 kN on 0.1 × 0.1 m, which is more than enough for standard high-bay racking. Because the floor is jointless, there are no weak zones at the racking base plates. In traditional concrete floors, these are among the most common points of damage, as joints are often placed in unsuitable positions.
In projects with extreme loads or more difficult ground conditions, we always carry out a geotechnical survey and pull-out tests for anchoring props. This is part of our advisory service.

MORE INFO ABOUT TEQTON?

Contact Ole Skov for questions and guidance on our products and available certifications

READ MORE IN THE EPD REPORT

Find it here: EPD report >